Youth Pulse
Youth Pulse is an LED face mask with five wavelengths — red, two infrared, yellow and blue — and four care modes: Brightening, Skin Tightening, Blemish-Prone Skin Care and Smoothing. Each session runs 10 minutes and switches off automatically. Powered by a separate controller with a 2600 mAh battery. Not a medical device; intended for cosmetic skincare.
18 900 ₽
จำนวน
1
Not a medical device.
Youth Pulse
Product type: LED mask for facial skincare (photobiomodulation)
Spectrum: 5 wavelengths — red 650 nm, infrared 850 nm and 1064 nm, yellow 590 nm, blue 460 nm (±5 nm)
Modes: 4 — Brightening, Skin Tightening, Blemish-Prone Skin Care, Smoothing
Design: mask shell with head straps + protective eye mask
Power: separate controller with a 2600 mAh battery, Type-C charging
Session: 10 minutes per mode, automatic shut-off
Colour: gold, LONGIVIYA
Contents
- Light that works at the cellular level
- Five wavelengths — five depths
- Four care modes
- How the mask is built
- What research says about the technology
- Specifications
- Who this mask is for
- How to use
- Before first use
- Who should not use it
- FAQ
- References
1. Light that works at the cellular level
Every skin cell contains mitochondria — tiny power plants that produce ATP (adenosine triphosphate), the fuel for every renewal process. With age, mitochondria slow down, cells receive less energy, and skin looks duller and less firm.
Photobiomodulation is the use of specific wavelengths of light on cells. Published research describes how red and infrared light interact with cytochrome c oxidase — a link in the chain that produces cellular energy [1]. Light of different wavelengths reaches different depths, which is why each is used for a different skincare task [4].
This is not a cream that stays on the surface. It is light that reaches the cell.
Youth Pulse is the first LED mask in the LONGIVIYA ecosystem. It complements nutraceuticals and skincare with a fourth layer — light.
2. Five wavelengths — five depths
The mask uses five light sources. Each has its own job.
Red — 650 nm. The most studied wavelength in photobiomodulation. Reaches the upper dermis, where fibroblasts — the cells responsible for skin firmness — are found [2]. The basis of the Skin Tightening and Smoothing modes.
Infrared — 850 nm. Invisible to the eye, reaches deeper than red. Research describes its role in mitochondrial activity and skin recovery after external stress [5].
Infrared — 1064 nm. The longest wavelength in the mask and the deepest reach. Works alongside 850 nm for fuller coverage by depth.
Yellow — 590 nm. A gentle wavelength for the look of skin tone. The basis of the Brightening mode.
Blue — 460 nm. Works at the skin surface. Studied in the scientific literature in the context of oily and blemish-prone skin [4]. The basis of the Blemish-Prone Skin Care mode.
Five spectra let you match the care to how your skin is today — not to a single task.
3. Four care modes
Switch modes with a short press of the controller button. Each mode runs for 10 minutes and switches off automatically.
Brightening. For dull skin, signs of a short night, uneven tone. After the session — skincare with brightening ingredients. Before the session, avoid products with vitamin C, vitamin A and alcohol: they are photosensitive.
Skin Tightening. For mature skin and the first signs of lost firmness. After the session — anti-ageing skincare.
Blemish-Prone Skin Care. For oily skin with enlarged pores and closed comedones. Before the session — a light moisturising lotion; after — moisturiser if skin feels dry.
Smoothing. For sensitive skin, seasonal reactivity, recovery after sun. Gentle cleansing before the session, daily sun protection afterwards.
Modes can be combined in one day — total time no more than 40 minutes.
4. How the mask is built
Mask shell — rigid, follows the shape of the face. Fastened with straps over the back of the head; the strap adjusts for height.
Eye mask — a separate protective insert. Included, reduces discomfort from the light and protects the eyes during a session.
Controller — a separate power unit with a 2600 mAh battery. Connects to the mask with a cable. One button: hold 1–2 seconds to switch on, short press to change mode. Four indicators show the active mode and battery level.
The battery sits outside the mask, so the mask is light and the controller can be charged separately.
5. What research says about the technology
The findings below relate to LED light technology in general, not to trials of this specific device.
| Focus | Study | What is described |
|---|---|---|
| Mechanism | Karu T., 2008 | Red and near-infrared light interact with mitochondrial cytochrome c oxidase [1] |
| Skin appearance | Wunsch & Matuschka, 2014; RCT, 113 participants | Improved appearance of fine lines and skin texture after a course of red and IR light [2] |
| Wavelength review | Avci et al., 2013 | Review of red, IR and blue light in skincare [4] |
| Recovery | Hamblin M., 2017 | Review of photobiomodulation mechanisms under external skin stress [5] |
6. Specifications
| Parameter | Value |
|---|---|
| Model | F2 |
| Wavelengths | Red 650 nm · IR 850 nm · IR 1064 nm · Yellow 590 nm · Blue 460 nm (±5 nm) |
| Modes | Brightening · Skin Tightening · Blemish-Prone Skin Care · Smoothing |
| Session | 10 min per mode, auto shut-off; no more than 40 min per day |
| Controller battery | 2600 mAh |
| Runtime per charge | 60 min |
| Charging | Type-C, 5 V; about 2.5 h |
| Mask dimensions | 270.2 × 196.6 × 14.5 mm |
| Water resistance | None — do not use in the bathroom, do not wash under water |
| Operating temperature | 10–40 °C |
| Storage | −10…60 °C, dry dark place |
| In the box | Mask, controller, Type-C cable, eye mask, manual |
| Warranty | 1 year from purchase |
7. Who this mask is for
— You notice the first signs of age-related change and want a skincare tool that works below the surface
— You have combination or oily skin and need a dedicated mode for problem areas — without changing your whole routine
— Your skin reacts to the season, sun and stress and you need a gentle recovery mode
— You are looking for a home alternative to a salon LED session and want to use it regularly
— You already use LONGIVIYA nutraceuticals or skincare and want to add light to your routine
8. How to use
One session — 10 minutes:
- Remove make-up and cleanse. Apply toner. Do not apply photosensitive products (vitamin C, vitamin A, alcohol, whitening ingredients)
- Connect the mask and the controller with the cable
- Put on the mask, adjust for height, fasten the straps at the back of the head. Strap centred on the top of the head
- Hold the button 1–2 seconds — the mask switches on. Short-press to select a mode: Brightening → Skin Tightening → Blemish-Prone Skin Care → Smoothing
- After 10 minutes the mask switches off by itself
- Apply skincare matched to the mode Frequency: up to 6 times a week. Once skin is used to it — daily is fine. No more than 40 minutes a day.
When: in the morning before make-up or in the evening after cleansing.
Device care: wipe with an alcohol-free wet wipe. Do not wash under water. Store in the box, in a dry place. Do not use the mask while the controller is charging.
9. Before first use
Run a light-sensitivity test:
- Cleanse the inner forearm and dry it
- Hold the area under the mask's light for 3 minutes
- Wait 24 hours No redness, burning or itching — you can use the mask. Any reaction — do not use the device.
10. Who should not use it
Do not use the mask with heart conditions, autoimmune or oncological diseases, during pregnancy and breastfeeding, with diabetes and impaired sensation, on damaged or inflamed skin, within two weeks after surgery, or while taking photosensitising medication.
The full list of restrictions is in the device manual. If in doubt, consult a doctor before use.
Do not look directly at the LEDs. Keep out of reach of children.
11. FAQ
Why is my face warm after a session?
A normal skin reaction to light. It passes within a few minutes.
Why is my skin dry after a session?
Apply a moisturiser right after the session.
Can I use it with make-up on?
No. Skin must be clean, free of oil and residue.
Can I use it in the bathroom?
No. The mask is not waterproof.
Can I take it on a plane?
Yes.
Does it affect eyesight?
Use the protective eye mask from the box and do not look directly at the LEDs.
The controller flashes white 5 times and does not switch on.
Low battery. Connect Type-C; charging takes about 2.5 hours. The indicator flashes while charging and stays lit when full.
12. References
[1] Karu TI. Mitochondrial signaling in mammalian cells activated by red and near-IR radiation. Photochem Photobiol. 2008;84(5):1091-1099.
[2] Wunsch A, Matuschka K. A controlled trial to determine the efficacy of red and near-infrared light treatment in patient satisfaction, reduction of fine lines, wrinkles, skin roughness, and intradermal collagen density increase. Photomed Laser Surg. 2014;32(2):93-100.
[4] Avci P et al. Low-level laser (light) therapy (LLLT) in skin: stimulating, healing, restoring. Semin Cutan Med Surg. 2013;32(1):41-52.
[5] Hamblin MR. Mechanisms and applications of the anti-inflammatory effects of photobiomodulation. AIMS Biophys. 2017;4(3):337-361.
Not a medical device. Intended for cosmetic skincare. Does not replace professional advice. If you have a skin condition, consult a doctor before use.
Not a medical device.